by Fmeaddons


The WLS HEL Series is an Flat Glass LED Area Lamp.

Download Spec Sheet


The HEL Modular Fixture is available in two mounting styles: Post Top and Side Mount.  The expected life if 60,000 to 100,000 Hours depending upon the ambient temperatures. Fixtures are finished with WLS’s DuraGrip® polyester powder coat.

Request More Information

Incentives And Rebates

The WLS Rebate and Incentive Team is dedicated to the research and capture of local, utility, state, and federal rebates and incentives for our customers and their projects by utilizing our National Rebate and Incentive Database.

Find Rebates and Incentives

Enter your project information below to request current rebates and incentives.


  • SMARTTEC™ THERMAL CONTROL – WLS driver features integral sensor which reduces drive current when ambient temperatures exceed rated temperature.
  • EXPECTED LIFE – Minimum 60,000 hours to 100,000 hours depending upon the ambient temperature of the installation location.
  • LEDS – Select high-brightness LEDs in Cool White (5000K) or Neutral White (4000K) color temperature, 70 CRI.
  • DISTRIBUTION – Types 3, FP, and 5. Exceptional uniformity creates bright environments at lower light levels. Improved backlight cutoff minimizes light trespass.
  • HOUSING – Modular fixture is available in two mounting styles – Post Top and Side Mount. One piece housing/support frame is die-cast aluminum. Combination mounting arm/driver enclosure on side mount versions is die-cast with integral ribs for heat dissipation. Access cover and support arms for post top versions are die-cast aluminum.
  • HOUSING TOP CAP – Removable spun aluminum cap/post top driver enclosure is retained by captive stainless steel fasteners and safety cables. Housing and top cap interface is sealed with one-piece extruded silicone gasket. Tool-less entry option is available.
  • SEALED OPTICAL UNIT – Lens is clear, flat tempered glass, sealed to aluminum optics housing. Pressure stabilizing breather allows super-tight protection while preventing temperature cycling form building up internal pressure and vacuum that can stress optical unit seals and components.
  • FASTENERS – All exposed fasteners are black oxide coated stainless steel. Internal fasteners are stainless steel or zinc electro-plated steel.
  • ELECTRICAL – A terminal block for attachments of incoming primary wiring is supplied. Twostage surge protection (including separate surge protection built into electronic driver) meets IEEE C62.41.2-2002, Scenario 1, Location Category C. Available with universal voltage power supply 120-277VAC (50/60Hz input), 347VAC and 480VAC. Optional button-type photocells (PCI) are also available in 120, 208, 240, 277 or 347 volt (supply voltage must be specified).
  • DRIVER – Available in Super Saver (SS) and High Output (HO) drive currents (Drive currents are factory programmed). Stat-of-the-art driver technology designed specifically for WLS LED light sources provides unsurpassed system efficiency. Components are fully encased in potting material for moisture resistance. Driver complies with IED and FCC standards.
  • OPERATING TEMPERATURE – -40°C to +50°C (-40°F to +122°F).
  • FINISH – Fixtures are finished with WLS DuraGrip® polyester powder coat finishing process. The DuraGrip finish withstands extreme weather changes without cracking or peeling.
  • WARRANTY – WLS LED fixtures carry a limited 5-year warranty



  • 5 Year Limited Warranty
  • 5 Year Guarantee on WLS DuraGrip finish
  • ETL Listed for Wet Locations
  • Listed to U.S. and Canadian Safety Standards
  • IDA Approved

This is a unique website which will require a more modern browser to work! Please upgrade today!